Pro-Link StandardAire Burst Refills SA23-30R EN - Manual (Page 3)

MATERIAL SAFETY DATA SHEET
___________________________________________________________________________________
Date of last change 08/25/2011
Page 3 of 4
Physical State
Aerosol
Appearance Clear Liquid
Odor Fragrant
Odor Threshold Not available
Vapor Pressure (PSIG) –
Aerosol @ 20 C 80-90
Boiling Point (ºC) (Conc) Lowest known value is 56 based on Acetone
Evaporation Rate Greater than 1
n-Butyl Acetate = 1
Vapor Density (Air = 1) Greater than 1
Solubility in Water g/L (20ºC) Miscible
PH Not Applicable
Specific Gravity (Liquid) Not Available
Coefficient of Water / Oil Dist Not available
Freezing Point (ºC) Not available
Percent Volatile (By Weight) 97-98
Specific Gravity (Aerosol) Not available
Hazardous products of decomposition
Hydrocarbon fumes and smoke. Carbon Monoxide where
combustion is incomplete
Chemical Stability: Yes Under normal conditions
Chemical Stability: No Not Applicable
Compatibility with other substances No: Strong Oxidising agents
Reactivity Conditions Not applicable
Hazardous Polymerization Will not occur
Reproductive effects
No Information is available and no adverse reproductive effects are
anticipated
Irritancy of Material Skin / Eye irritation
Sensitizing Capability of
Material Unknown
Carcinogenicity of Material The ingredients of this product are not listed as Carcinogens by NTP,
(National Toxicology Program), not regulated as Carcinogens by OSHA
(Occupational Safety and Health Administration), and have not been
evaluated by IARC (International Agency For Research on Cancer), nor
by ACGIH (American Conference of Governmental Industrial
Hygienists).
Teratogenicity No information is available and no adverse Teratogenic effects are
anticipated
Mutagenicity No information is available and no adverse Mutagenic effects are
anticipated
Environmental
Not Available
9. PHYSICAL & CHEMICAL PROPERTIES
10. STABILITY & REACTIVITY
11. TOXICOLOGICAL INFORMATION
12. ECOLOGICAL INFORMATION