Wilbur Curtis WB5GT - Manual (Page 7)

7
Curtis can provide and optional wall mount assembly that allows you to
place your Curtis water boiler against a wall surface. The water boiler may
be mounted with the faucet facing in either direction. The kit requires some
assembly.
To order the wall mount kit, request Curtis part number WC-37347; to be
used on water boiler units WB5GT.
WALL MOUNT OPTION
CLEANING
Regular cleaning and preventive maintenance is essential in keeping your water heater looking and working like new. To clean the
water heater unit and components, prepare a mild solution of detergent and warm water.
CAUTION – Do not use cleansers, bleach liquids, powders or any other substance containing chlorine. These products pro-
mote corrosion and will pit the stainless steel. USE OF THESE PRODUCTS WILL VOID THE WARRANTY.
DAILY CLEANING
1. Wipe exterior surfaces with a cloth soaked with a mild detergent solution. Wipe off any spots, dust, spills, or debris.
2. Rinse the area with a cloth soaked with clean water, removing any residual detergent.
3. Dry the area.
4. If a drip tray is used, dump out the water and clean inside the tray. Remove the screen and wash.
5. Dry the tray.
6. Rub a stainless steel polish on the outside surfaces to protect the cabinet.
WB5GT ROUGH-IN DRAWING