1 audio operation – Zigen AX-88 Audio User Manual
Page 37
Matrix Switching System—User Manual
36
Save: Click this button to save the connected combinations output ports and input ports.
It also includes the present input/output switching relations and all audio settings.
For more relative information, refer to
“STO” key function.
All Output: A Hot Key for you to set the same value to all
output channels. Select the All
Output check box, then key in example
“5” value in the channel 1 output. Click
anywhere on the screen, the all channels output will become
“5” value.
Figure 7-14 All Output Check Box Function
A / V Link: Link between audio and video, video function is not supported on AX-88.
Key In: A Hot key for keying in the value 0~99 quickly. After setting the value, click
“Enable” to save changes.
Previous and Next: If the connections of your matrix switching devices are over 8
devices, you can click
“Previous” or “Next” to view the console list by page.
7.0.3.1 Audio Operation
For audio configuration, click Audio button to drop down
“Audio Settings” screen. For
Video button, AX-88 is not supported.
Figure 7-15 Audio Operation
In
“Audio Settings” screen, you can select output port1~8 from the drop-down list. If
you want to mute the volume, please select the Mute check box. You can also adjust the
Subwoofer, Bass, Treble or Lip-sync value here.
Figure 7-16 Audio Settings