Zigen AX-88 Audio - Manual (Page 22)

Matrix Switching System—User Manual
21
7.0 Matrix Application Software
7.0.1 Software Introduction
The 《AV Matrix》 Matrix control software applies to different input/output matrixes.
7.0.1.1 Software Description
The《AV Matrix》matrix testing software is an application tool developed for matrix testing
and application. The software operation environment is as below:
Window98/2000/NT/XP/ operating systems
32M internal memory or above
10M hard disk space or above
CD-ROM
At least one serial communication port
7.0.1.2 Software Activation
Power on the computer: Implement the AV Matrix.msi in the bundled CD-ROM to
activate installation screen as below, click
“Next”. And follow the instructions on screen
to finish the installation.
Figure 7-1 AV Matrix Installation Screen
7.0.1.3 Connect AX-88 and PC
You must power off the AX-88 matrix switching device. Then, connect the matrix RS-232
port to the PC RS-232 port with the bundled communication cable. And make sure the
DIPs on the rear panel are set to Master and RS-232. (Refer to the previous section 6.0.2
Audio Matrix System Remote Control.