1 main operation interface – Zigen AX-88 Audio User Manual

Page 25

Matrix Switching System—User Manual

7.0.2.1 Main Operation Interface

Refer to the main screen as above, the marked blue area shows crossing matrix of

output ports 001-008 and input ports 001-008. For the basic operation is described as

below:

Examples for Selecting Matrix Switching Functions:

Example: Now there is an AX-88 matrix having all the input/output ports properly

connected to the equipments. If you want to set channel 1 input to channel 2, 3 and 4

output; channel 3 inputs to channel 1 output. There are 2 ways to implement the

switching. Please follow the ways and steps to finish the switching functions:

First way: Directly click on the corresponding icons on the matrix

to transform

them into

to complete the switching operation.

Second way:

Step 1: First select the

“Output” number keys 002, then select 003 and final select

004 to the right of the blue configuration area, and select the

“Input”

number key 001 to the bottom. Then, press consecutively the previously

selected

“Output” number keys 002, 003 and 004. This way, you have

selected

“Input” 001 and “Output” 002, 003 and 004 switching.

Step 2: First select the

“Output” number key 001 to the right of the blue

configuration area, and select the

“Input” number key 003 to the bottom.

Then, press the previously selected

“Output” number key 001. This way,

you have selected Input 03 and Output 001 switching.

Upon completion of the above steps, you have actually completed the switching

operation of having channel 1 input to channel 2, 3 and 4 outputs while at the same time

successfully switched from channel 3 inputs to channel 1 output.

The main configuration screen also shows you some function buttons for easy operation:

Switch Tab: Click

“Switch” tab to show the main configuration screen.

Audio Tab: Click the

“Audio” tab to show the audio related configuration screen. For

more information, refer to

Video Tab: Click the

“Video” tab to show the video related configuration screen. This

function is NOT supported for AX-88.

Disconnect: To disable the connections. After you had configured the connection

between input and output ports, you can click this button to disable the connections.

Select all output: Click this button to select all output ports including output 001~008.