Woo Audio WDS-1 User Manual

Page 11

Text mode
Original mode

www.wooaudio.com

Rev 1.1. Feb 20, 2014

Powering Up

To power up on the WTP-1 press the power button

⑪ until pressure is felt and

the VFD screen should turn on.

To power up on the WDS-1 press the power button

⑫ until pressure is felt and

the VFD screen should turn on.

If you buy both WTP-1 and WDS-1 and decide to stack them. The power button
on the WTP-1

⑪ becomes a simultaneous power button and will be able to

power up both WTP-1 and WDS-1 at the same time. Refer to Installing the
Power Cord on how to do this.

Connecting the WTP-1 with the WDS-1:

Here at Woo Audio we believe flexibility is extremely important, which is why
we offer three ways to pair the WTP-1 and WDS-1 together; Optical

⑤,

AES/EBU

⑥, Coaxial ⑦ refer to the above diagram.*

*These three connections allow for 16-Bit/44.1kHz CD quality of music for your
listening pleasure.