Ryobi TSS120L - Manual (Page 8)

8 − English
FEATURES
PRODUCT SPECIFICATIONS
Arbor Hole ..........................................................................1 in.
Blade Diameter .................................................................12 in.
No Load Speed .......................................... 4,000 r/min. (RPM)
Input ..............................................120 V, AC only, 60 Hz, 15 A
Cutting Capacity with Miter at 0°/Bevel 0°:
Maximum nominal lumber sizes .............. 2 x 14 in., 4 x 6 in.
Cutting Capacity with Miter at 45°/Bevel 0°:
Maximum nominal lumber size ...............................2 x 10 in.
Cutting Capacity with Miter at 0°/Bevel 45°:
Maximum nominal lumber size ...............................2 x 14 in.
Cutting Capacity with Miter at 45°/Bevel 45°:
Maximum nominal lumber size ...............................2 x 10 in.
Cutting Capacity for Crown Molding (Nested):
Maximum lumber size .............................................. 5-1/4 in.
Cutting Capacity for Baseboards Against the Fence:
Maximum height .............................................5-1/2 x 3/4 in.
BEVEL
SCALE
BEVEL
LOCK KNOB
LOCK PIN
SWITCH
TRIGGER
DUST
BAG
SLIDING
MITER FENCE
TABLE
EXTENSION
BASE
WORK
CLAMP
MITER
TABLE
CONTROL
ARM
MITER
LOCK HANDLE
“NO HANDS
ZONE” LABEL
“NO HANDS ZONE”
BOUNDARY LINE
MITER
SCALE
UPPER BLADE
GUARD
LOWER BLADE
GUARD
SLIDE
LOCK KNOB
SLIDE BAR
SUPPORT FOOT
DETENT RELEASE LEVER
BLADE
WRENCH
THROAT
PLATE
LASER
GUIDE
DEPTH
CONTROL KNOB
DEPTH
STOP
POSITIVE
STOP(S)
Fig. 1
BASE/CROWN
INDICATOR
“D”
HANDLE