Cisco 1721 - Manual (Page 31)

1-9
Cisco 1721 Router Hardware Installation Guide
78-13834-02
Chapter 1 Cisco 1721 Router Overview
Unpacking the Router
Processor board ID VEN0539000D (3033334544), with hardware revision
0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 Virtual Private Network (VPN) Modules(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x0
Unpacking the Router
Table 1-5 lists the items that come with your router. All these items are in the
accessory kit that is inside the box that your router came in.
Additional Required Equipment
Depending on your local network and on which Cisco WICs you install in your
router, you will require other items, listed in
Table 1-6 , to complete your router
installation.
Table 1-5 Router Box Contents
• Power cord (black)
• Power supply
• DB-25 to DB-9 adapter
• Console cable, RJ-45 to DB-9 (light blue)
• Product documentation