Petsafe Innotek Cabela’s Gun Dog Remote Trainer - Manual (Page 8)

Cabela’s ® Gun Dog ® — Owner’s Manual 8
continued from previous page
To use Dual Dog mode:
1 1.. Turn on receiver collar 1 using the
TONE key. Place receiver collar 1 at
least 6 feet away.
2 2.. Set the desired Dog 1 stim level with
the UP and DOWN arrow keys.
3 3.. Press Dog Select button to
switch to Dog 2.
4 4.. Turn on receiver collar 2 using the
TONE key.
5 5.. Set the desired Dog 2 stim level with
the UP and DOWN arrow keys.
6 6.. Press the Prog/Loc button until the
PROG symbol displays, then release
the button.
7 7.. Press the Dog Select button to
switch between DOG 1 – 2 mode
(displays single dog head symbol
and stim number) and DUAL DOG
mode (displays both dog
head symbols and “2d” in
the display).
8 8.. Repeatedly pressing the Dog Select
button switches between DOG 1 – 2
mode and DUAL DOG mode.
9 9.. To save the chosen setting and exit
programming, press and release the
Prog/Loc button.
Remember, the red stim button is for
Dog receiver collar 1, and the gray stim
button is for Dog receiver collar 2.
When using Dual Dog mode, the
following buttons are not functional:
• Tone
• Alt Stim
• stim level down
• stim level up
G GS S--7 70 00 00 0 O ON NL LY Y::
Alternate Stimulation (Alt Stim)
Some trainers depend upon instant
access to a higher stimulation setting for
circumstances where the dog may not
respond to lower levels, such as a high
distraction environment. Your GS-7000
Transmitter features a red, preset Alt
Stim button that you can use to deliver
an alternate (higher) level of stimulation.
P Prro og grra am m tth he e A Alltt S Sttiim m B Bu utttto on n
To change the stimulation level of the
GS-7000 Alt Stim button:
1.Press the Prog/Loc button and hold
until the PROG symbol is displayed,
then release the button.
2.Press the Alt Stim button.
3.Press or until you get to the
desired stimulation level.
4.When finished, press and release the
Prog/Loc button.