Petsafe In-Ground Fence™ - Manual (Page 7)

6 1-800-732-2677 www.petsafe.net 7
Operating Guide
Locate the Fence Transmitter
Place the Fence Transmitter:
• In a dry, well ventilated, protected area (1A, 1B).
• In an area where temperatures do not fall below freezing (e.g., garage, basement, shed, closet).
• Secured to a stationary surface using the mounting hardware. A mounting template is included in the back of this
guide.
• At least 3 feet from large metal objects or appliances as these items may interfere with the signal consistency (1C).
To mount the Fence Transmitter, screw the mounting bracket onto a stationary surface such as a wall, and slide the
Fence Transmitter onto the bracket. Once you have mounted the Fence Transmitter, the Boundary Wire must exit
the building. This can be accomplished via a window or through a hole drilled through the wall. Ensure the drill
path is clear of any utilities. Make sure the Boundary Wire is not cut off or pinched by a window, door, or garage
door, as this can damage it over time.
To prevent fires and electrical hazards, install the Fence Transmitter in buildings that are in accordance with state
and local electrical codes.
1A 1B
3ft.
1C
Step
1