Petsafe Elite Big Dog Add-A-Dog® Extra Receiver Collar - Manual (Page 14)

14 Customer Care Center 1-800-732-2677
To Re-Thread the Collar
Ridges
Slide Buckle
: The slide buckle prevents the collar from becoming loose around your pet’s neck.
: The ridges must be facing up; the collar will slip if it is not properly threaded.
Step 4
Two Dog System
Note: If you wish to add another receiver collar to the training system, ADD-A-Dog ® collars are
available where you bought your training system, through our website or Customer Care Center.
PAC00-13631—Little Dog ADD-A-Dog
® or PAC00-13632—Big Dog ADD-A-Dog ®
To Add Dog 2
Handheld Remote
1. Press the Stimulation Down (lower right) button consecutively
until “2d” appears on the Digital Display.
2. After the “2d” appears press the +2 Boost button.
3. Set Dog 1 Stimulation level to the desired level using the
Stimulation Up and Down buttons.
4. Press the +2 Boost to lock the correction level for Dog 1.
5. Set Dog 2 Stimulation level to the desired level using the
Stimulation Up and Down buttons.
6. Press the +2 Boost to lock the correction level for Dog 2.
Dog 2 Receiver Collar
1. With the Receiver Collar off your pet, turn the Receiver Collar off.
2. Press and hold the On/Off button for 5 seconds.
3. The Receiver Collar will beep and the LED will flash.
4. On the Handheld Remote, press the Upper Right or Lower Right button.
5. The Receiver Collar will respond and pair.
6. If the Receiver Collar does not respond, please contact the Customer Care Center.
Digital Display
Tone Stimulation
Up
Charging Jack
(with cover)
Transmitter Antenna
Stimulation
Stimulation
Down
+2 Boost