Nextteq Irritant Smoke Tube Kit for Respirator Fit Testing and Airflow Indication User Manual

Page 26

Nextteq Irritant Smoke Tube Kit Manual

The Gastec Irritant Smoke Tube (Part Number 9501) is manufactured by the Gastec Corporation.

Nextteq is Gastec’s exclusive U.S. master wholesale distributor.

Page 23

Tel: 813-249-5888 Toll free: 877-312-2333 Fax: 813-249-0188 Toll free: 877-312-2444 www.nextteq.

P/N 9505 Rev F 8/09

MSDS

______________________________________________________

part 7 - Spill, leak, and disposal procedures

______________________________________________________
Spill procedure: Does not apply.
broken glass Cleanup: Broken glass should not be picked up with

bare hands.
disposal procedure: Soak used tubes in large volume of water and

neutralize with sodium carbonate or equivalent alkaline substance.

Dispose of tubes via landfill. Consult local authorities to assure

compliance with all local, state, and federal laws and regulations,

including but not limited to EPA regulations.

______________________________________________________

part 8 - Special protection Information

______________________________________________________
protective equipment: For irritant smoke quantitative fit testing,

wear respiratory protection in accordance with OSHA 29 CFR

1910.134, NIOSH 42 CFR Part 84, and good practice. Wear safety

goggles to minimize eye contact and keep eyes closed during

exposure to irritant smoke. Wear chemical resistant safety gloves

with resistance to broken glass in accordance with NIOSH and

OSHA standards and good practice.

______________________________________________________

part 9 - Special precautions and Comments

______________________________________________________
dangerous to life: Read, understand, and comply with all

instructions, warnings, labels, and other literature accompanying

this product before attempting to use or using this product. Use

this product in accordance with the manufacturer’s instructions,

specifications, and warnings, and only with the manufacturer’s

specified parts, components, and accessories.