Nextteq llc (rev. 2) 4/09 – Nextteq Standard Airtec Regulator Kit User Manual
Page 17
PACKING LIST
SECTION II: Airtec Kit Components
17
NEXTTEQ LLC (Rev. 2) 4/09
_______________________________________________________________________
2.3 TUBE HOLDER
The tube holder is designed to hold a Gastec detector tube leak-tight in series with the
regulator flow meter.
Important
Use only Gastec Airtec tubes. Other Gastec tubes are NOT calibrated for use with this
type of sample delivery. See Section 1.3 (page 12) for further information.
FIGURE 4
READING THE FLOWMETER
TABLE 4
FLOWMETER SPECIFICATIONS
Item
Specifications
Range
100-500 scc/min
Delivery Pressure
50 psi (preset)
Backpressure Compensation Yes
Metering Value
Integral with flow meter
This manual is related to the following products: