General specifications, General safety precautions – Nexen SBPA05 964950 User Manual
Page 4
FORM NO. L-21067-C-0813
4
GENERAL SPECIFICATIONS
Size
Min Holding
Torque
Torsional Rigidity
(Estimated)
Inertia
(Calculated)
Weight
Min. Disengagement
Air Pressure
Size 2
1.9 Nm
[17 in-lb]
4431 Nm/RAD
[3267 ft*lb/RAD]
0.00002 kg*m^2
[0.0005 lb*ft^2]
56 watts
[0.075 HPT]
1.1 kg
[2.5 lbs]
Size 3
11.3 Nm
[100 in-lb]
5287 Nm/RAD
[3900 ft*lb/RAD]
0.00007 kg*m^2
[0.0016 lb*ft^2]
104 watts
[0.14 HPT]
2 kg
[4.5 lbs]
Size 4
22.6 Nm
[200 in-lb]
7456 Nm/RAD
[5500 ft*lb/RAD]
0.00024 kg*m^2
[0.0058 lb*ft^2]
135 watts
[0.18 HPT]
4.5 kg
[9.9 lbs]
Size 5
45.2 Nm
[400 in-lb]
23448 Nm/RAD
[17294 ft*lb/RAD]
0.00117 kg*m^2
[0.0276 lb*ft^2]
149 watts
[0.20 HPT]
7.5 kg
[16.6 lbs]
GENERAL SAFETY PRECAUTIONS
CAUTION
WARNING
The output shaft needs to be enclosed
either by gear reducer or appropriate
guarding. Failure to guard could result
in serious bodily injury.
The temperature limits for the product
are 4.5-100 degree Celsius (40-220
degree F).
CAUTION
WARNING
WARNING
Watch for sharp features when
interacting with this product. The parts
have complex shapes and machined
edges.
This product is capable of emitting
a spark if misused, therefore it is not
recommended for use in any explosive
environment.
The output shaft needs to be enclosed
either by gear reducer or appropriate
guarding. Failure to guard could result
in serious bodily injury.
Pneumatic units accept an optional solenoid valve (normally closed) controlled by 24VDC at 104 mA. Solenoid valves are
fitted with 18” flying leads standard. To order the solenoid valve (optional), please refer to Nexen product #964650.