Metalfab Model DB2 Volumetric Screw Feeder User Manual
Page 3
3
The trough cover (Part #10) may be removed by undoing the bolts
and lifting vertically off the trough assembly.
Reassemble by reversing the above procedures.
WHEN INQUIRING ABOUT ANY FEEDER, ALWAYS REFER TO THE
SERIAL NUMBER STAMPED ON THE METALFAB NAMEPLATE.
Metalfab Service
Metalfab, Inc.
Prices Switch Road
P.O. Box 9
Vernon, NJ 07462
Phone (973) 764-2000
Fax (973) 764-0272
Email: