Metalfab Model DBIM (mini) Volumetric Screw Feeder User Manual
Page 3
The hopper (Part #12) may be removed by undoing the bolts (Part #11) and
lifting vertically off the trough assembly (Part #4).
Re-assemble by reversing the above procedures.
When inquiring about any feeder, always refer to the Serial Number
stamped on the Metalfab nameplate.
Metalfab Service
Metalfab, Inc.
Prices Switch Road
P.O. Box 9
Vernon, NJ 07462
Phone (973) 764-2000 * Fax (973) 764-0272
Email: