M2tech, Unpacking and placing the unit – M2TECH Marley User Manual

Page 9

marley
DUAL-DRIVE CLASS-A HEADPHONE AMPLIFIER / PREAMP

REVISION 1.0 – NOVEMBER 2013

M2Tech

www.m2tech.biz

1. Unpacking and Placing the Unit

Lay the box on a table and open it by separating it from the external paperwork and
removing or cutting the adhesive tape seal. The following items are included:

• One MARLEY;
• One wall wart;
• This manual.

Should one or more item be missing, please contact your dealer.

Remove the MARLEY from the foam enclosure and place it onto a stable base, far from
heat sources. Avoid full sunlight on the unit. Allow for ample room around the unit for
venting.

The MARLEY is a high bias dual drive class A amplifier which dissipates 30W while
operating, even when idle; therefore a lot of heat is produced. As a result, it is
necessary to guarantee adequate air flow.

Avoid smoke, moisture, dirt and water reaching the unit.

Do not place the unit on thick carpets or inside a box or piece of furniture, not even
close to curtains.