M2TECH Marley - Manual (Page 31)

marley
DUAL-DRIVE CLASS-A HEADPHONE AMPLIFIER / PREAMP
REVISION 1.0 – NOVEMBER 2013
Copyright © 2013, M2Tech Srl
31
M2Tech
www.m2tech.biz
8. Technical Specifications
Inputs: ............................................... 2 line level on gold-flashed RCA sockets
Outputs: ............................................ 2 6,35mm (1/4”) stereo jacks
1 4-pin female XLR socket
Preamp out on gold-flashed RCA sockets
Tape out on gold-flashed RCA sockets
Supply input: ..................................... 5.5/2.1mm jack with positive on tip
4-pin male XLR socket for +15V/-15V/+5V
Output voltage: ................................. 8Vrms max (single-ended)
16Vrms max (balanced)
Output power: ................................... 4Wrms p.c. @ 8 Ohm (single-ended)
Input impedance: .............................. 40kOhm
Gain: ................................................. 12dB (single-ended)
18dB (balanced)
SNR: ................................................. 120dB (8Vrms, 1kHz, “A” weighted)
THD+N:............................................. 0,003% (2Vrms, 1kHz)
Volume range ................................... 0dB to -78dB with 1dB steps
Muting ............................................... -20dB
Balance range................................... +/-6dB with 1dB steps
Auto switch-off .................................. 30 to 240 minutes with 30 minutes steps,
or disabled
Power supply: ................................... 15V
DC
2A
Power consumption: ......................... 30VA
Size:.................................................. 200x50x200mm (w x h x d)
Weight............................................... 2kg (unit only)
3kg (with packaging)
For technical support please contact your retail dealer or e-mail to:
[email protected]