Default settings and default programs, Default values, Chapter 6 default settings and default programs – B&C Technologies M720 Dryer Control (DE, DP, DI Series) User Manual
Page 46: 1 default values
Chapter 6
Default Settings and Default Programs
6.1
Default Values
Because the programmed language can vary, no default program names are set, except for program
100, which will be called Single cycle.
Table 6.1: M720 Factory Default Values
Parameter
Description
Value
1
Drying method
TIME
3
Min. drying time
10 m
4
Max. drying time
45 m
5
Drying time
40 m
7
Dry temperature
167
o
F / 75
o
C
8
Offset sensor 2
2
o
F /
o
C
9
Offset infrared
4
o
F /
o
C
10
Humidity dry val.
15.00%
18
Cooldown time
10 m
19
Cooldown temp.
95
o
F / 35
o
C
23
Drum direction
REV
24
Drum speed
100.00%
25
Drum stop time
1 s
26
Drum run time
45 s
29
Anti crease funct.
YES
32
Max. temp. rise
0
o
/m
33
Max. temp. fall
0
o
/m
In the default programs, some parameter values are set to a different value to provide different
programs to start with. The following default programs are available:
43