B&C Technologies HI Series Commercial - Manual (Page 4)

The HI line is the industrial fixed
mount washer-extractor series of machines
from B&C Technologies. It is an open
pocket washer-extractor with a large door
opening for easy and quick loading and
unloading. It has been developed for the
institutional and industrial market, and is
suitable for commercial laundries, hotel,
food processing plants, factories and other
places where laundry might be process
The design allows for top
performance at lowest possible operation
cost and investment. The flexible electronic
control center ensures that maximum
productivity is obtained.
The HI series utilizes high quality
material, such as 304 (18/8) stainless steel
in vital parts in contact with the wash
solution. It has a stainless steel cabinet for
long life with easily removable panels.
The key advantages of this series are
the simplicity of the microprocessor and the
electronic AC drive system, which utilizes
only one motor. The system allows for
washing and extraction at any speed and
mechanical action to suit any textile fiber
used today and tomorrow. A heavy duty
computer analyzed and tested frame isolates
objectionable vibrations and the high speed
final extraction saves time and energy in the
finishing operation.
The main bearing is located outside
the wash solution and will not be damaged,
should the shell seals leak. The machine is
provided with two V-seals, which are very
reliable and will last for many years. The
calculated life expectancy of the bearing is
in excess of twenty years.
The five compartment, side mounted
supply dispenser for powder and liquid
detergents are standard and the machine is
designed to accept the connection of 5
additional external chemical lines and
pumps. More chemical connections are
available as an option.
The HI series is also prepared to
accept the connection of water reuse
systems. These systems can be installed
separate or on top of the machine. They are
available in either single or dual tanks for
maximum savings of water up to 40%. The
tanks can be equipped with or without
steam or electrical heat depending on
installation and operation. The water reuse
system is programmable by the machines
electronic control center.
Customer Service
For technical assistance, call:
Phone: (850)-249-2222
FAX: (850) 249-2226
e-mail: [email protected]
Web: www.bandctech.com
In Thailand
Phone: +66 (0) 2740-5511
FAX: +66 (0) 2740-5522
e-mail: [email protected]
Web: www.accuratethai.com
Replacement Parts
In the event that literature or replacement
parts are required, contact your local
distributor, or contact B&C Technologies at
the above phone numbers/internet
addresses.
Introduction
HI Series Washer-Extractors
4