Cabletron Systems SEHI100TX- - Manual (Page 57)

Chapter 7: Local Management
7-16 SEHI100TX User’s Guide
7.8 THE SNMP TOOLS SCREEN
This section describes how to use the SNMP Tools screen to access
Management Information Bases (MIBs). Access to screen options
depends on the access status accorded to the user’s community name.
This section describes Super-User management capabilities.
SNMP Tools allows access to valuable MIB information. The user gets
information about specific object identifiers (OIDs), edit the values of
configurable OIDs, and request the OID numerically sequential to the
originally requested OID.
Other ways to view OIDs from the SNMP Tools screen include Walking,
Stepping, and Cycling. Walk and Cycle let the user review several OIDs at
a time.
To access the SNMP Tools screen from the Features Selection screen, use
the arrow keys to highlight the SNMP Tools Support option, then press
ENTER or F9. The SNMP Tools screen shown in Figure 7-7 appears.
Figure 7-7 SNMP Tools Screen
The following sections describe SNMP Tools screen fields.
SNMP COMMUNITY NAME
Identifies the community name used as a password to determine access
level to the MIB component.
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
SNMP TOOLS
SNMP COMMUNITY NAME: public
OID PREPEND: 1.3.6.1
GET SET GETNEXT WALK RECALL-OID STEP CYCLES REPEAT
F6 F7 F8 F9
RETURN
F10
1490_26
SEHI Book Page 16 Wednesday, May 15, 1996 10:42 AM