Panasonic TYRM50VW - Manual (Page 7)

ID Remote Control_______
You can set the remote control ID when you want to use this
remote control on one of several different displays.
|VIDEO| |AUDIO|
ASPECT
I CONTRAST BRIGHTNESS I
- SET +
o W o
+ o
MUTE VOL
0 _ o
(D
^ (33 d) d)
1 (D d) d)
Panasonic
DISPLAY
1. Press [ID] button. The red LED blinks twice.
2. Press [ID SET] button for more than 1 second to enter the
ID Mode. The red LED lights up.
Press the [ID SET] button again will exit the ID Mode. The
red LED lights off.
3. Press the digit numbers [0] ~ [9] to select the display you
want to control.
For example: press [0] and [1] for display #1, press [1] and
[1]fordisplay#11.
The numbers available are from [01] ~ [25].
4. Not pressing any button within 10 seconds will exit the ID
Mode.
5. If an error pressing of buttons other than the digits
occured, wait 1 second after the red LED lights off and
then lights up again, then press the correct digits again.
6. Press [ENTER] button to confirm. The red LED blinks
twice and then lights off.
NOTE:
Press [NORMAL] button. The green LED blinks twice,
indicating the display is in normal operation.
Entering OSD Menu
Using the display’s control buttons
1.
2.
3.
4.
5.
Press [MENU] button to display the OSD menu.
Press or ^] button to choose the item you want to
adjust.
Press [INPUT] button to enter the submenu.
In the submenu, press or ^] button to toggle among
items, press H”] or [—] button to adjust settings. If there is
a submenu, press [INPUT] button to enterthe submenu.
Press [MENU] button to return to the previous menu, or
press [MENU] button several times to exit the OSD menu.
Using the remote control
lECALL T—I MENU
O g o
E ] © S
AUTO
SETUP --------------- EXIT
o [
t
J o
1. Press [MENU] button on the remote control to display the
OSD menu.
2. Press ^] or ^] button to choose the item you want to
adjust.
3. Press [SET] button to enter the submenu.
4. In the submenu, press ^] or ^] button to toggle among
items, press H-] or [—] button to adjust settings. If there is
a submenu, press [SET] button to enter the submenu.
5. Press [EXIT] button to return to the previous menu, or
press [MENU] button to exit the OSD menu.
NOTE:
• Refer to the Operation Instruction Book of TH-55LFV50 for
OSD Menu Overview.