Panasonic TYRM50VW - Manual (Page 3)

Accessories
Check ifyou have the accessories shown
Remote Control
AAA Batteries
External IR
Receiver
Operation
instruction book
Installing Batteries
Requires two AAA batteries.
1. Press and then slide the cover to open it.
2. Align the batteries according to the (+) and (-) indications
inside the battery compartment.
3. Replace the cover.
Helpful Hint: For frequent remote control users,
replace old batteries with Alkaline batteries for
longer life.
A\
Precaution on using
battery
Incorrect installation can cause battery leakage and corrosion
that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly
manner.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use
new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with
“Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat
or burn used batteries.
5. Battery replacement is necessary when the remote control
acts sporadically or stops operating the Display.
6. Do not burn or breakup batteries.
7. Batteries must not be exposed to excessive heat such as
sunshine, fire or the like.