Power and audio controls, Voiume adjustment, Source] turn the power on – Panasonic CQRDP162N User Manual

Page 6: Hold down over 2 sec.): toggle loudness on and off, Sound quality adjustment, V.;.,..;. select a s, Vol] : adjust the level

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Power and Audio Controls

Voiume adjustment

/\ : Up
V : Down

• Hold down: fast forward

Power on

Start the engine first!

... ySOURCE^'.

[SOURCE]
Turn the
power on.

»[SOURCE] (Hold down) :

Turn the power off.

[MUTE] Toggle the
Mute on and off.

• Mute the sound.

(Hold down over 2 sec.):

Toggle Loudness on and
off.

® Enhance bass and treble

tones at low volume.

Sound quality adjustment

( Notes )

® Power on

»The volume increases gradually

to the last level if that level was
over 20.

»When first powered up, a mes

sage is displayed

® [DISP]: Stop the message.
® [SOURCE](Hold down at power

off) :Turn on the power and dis
play the message.

[SEL] :

I Regular Mode |

v.;.,..;. Select a

s-''

ffl Volume

!;J ;■:■■■(

SEL

( Note )

® No operation for 5 sec.

Return to the regular
mode.

® If the fader is set to

front, the pre-amp out

put (rear) is decreased.

;■■■ ■ [VOL] : Adjust the level.

: Up

V : Down

(-12 to 4-12 in 3 dB step)

(left/right : 1 to 15)

(front/rear : 1 to 15)