I cd changer control (for cq-rdp162/rdp112n), Source, Select cd changer – Panasonic CQRDP162N User Manual

Page 11: Troubleshooting, Something wrong, I general, Vdisc/\]: select a cd, Track, Select a track, Cautions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

î.:

.....

I CD changer control

(For CQ-RDP162/RDP112N)

•

Use the CD changer exclusively to play back normal

music CDs. It cannot play back CD-ROMs, CD-RWs or
MP3s. (Some CD-Rs are supportedd, but not all.)

•

This unit dose not support CD text display.

[SOURCE] :

Select CD Changer.

(Playback starts.)

Troubleshooting

• Never try to repair by yourself.

Something wrong?

(Ex. no sound, smoke and smell

•4-

possibility of fire or shorting)

©Turn off the power immediately.
(D Detach the power cord and bring the unit to

your dealer.

General

Disc Number Track Number

[VDISC/\]: Select a CD.

■a Previous CD :V
• Next CD

:A.

[◄◄TRACK^>] :
Select a track.

• Next track >►

• Start of current track :

◄◄ Press once

• Previous track :

◄◄ Press twice

• Hold down :

►► Fast forward
◄◄ Fast reverse

Release to play CD.

Cautions

• Only CDs with the label at

right are usable.

® Do not touch the recorded

surface.

Labeled side up!

»Avoid leaving CDs in the following places.

»Direct sunlight
«Dirty or moist
»Seats or dashboard

I Normal CDs

only.

»Wipe CDs with a

dry soft cloth in
the direction
specified at right.

No sound

Noise

Start the engine. (Or turn the igni
tion switch to the ACC position.)
Verify the wiring. (Ex. battery cord,

ACC cord, grounding cord, etc.)

Fuse blown (Contact the nearest
Panasonic Service Center.)

Ask a professional for fuse

replacement.
Be sure to use the same rated fuse.

• Disable the mute function.
• Verify the wiring.
• Wait until the dew disappears

before turning on the unit

• Keep a distance between this unit

and an activated

c e l l u l a r p h o n e .

RADIO

Frequent
noise

Preset data

deleted ___

»Tune in to another high-intensity station.
»Extend the antenna fully.

»Connect the battery cord correctly.

I CD Player

No sound, or CD
or CD-R Is auto
matically ejected

Sound skip, poor

sound quality

Sound skip

due to vibration

CD not

ejectable

I Load the CD correctly.
»Clean the CD.

»Clean the CD.

»The maximum permissible tilt is

30° from front to rear.

»Secure the unit.

»Turn off the car engine (ACC off) and remove

the fuse from the battery lead (yellow) for 1

minute or more. Then reinstall the fuse.

Sound quality

Any one of

speakers (front,

rear, right and
left) does not

generate sound.

Left and right
sounds are

reversed

»Adjust the balance and fader.
»Verify the wiring.

»Connect the speaker cord cor

rectly.