Casio IT-600 User Manual
Page 43
E-41
1
USB Client Port
2
USB Host Port
3
Selector Switch
4
AC Adaptor Jack
5
Terminal Detect
Switch
6
Power Contacts
7
Power Indicator
Lamp
8
Mount Hooks
This port is used to transfer system data and file data (download,
upload) by connecting the Cradle to a PC using a USB cable
(DT-380USB). A dedicated driver must be installed in the PC
before connecting the Cradle to the PC.
This port is used to connect a corresponding USB peripheral
device.
This switch is used to switch between the USB host port and
USB client port.
Connect the AC adaptor here.
This switch detects when the IT-600 is seated correctly on the
Cradle.
Power is supplied to the IT-600 via these contacts.
This lamp indicates the power status and the mounting status of
the IT-600.
Off: IT-600 is not installed
Green: Power on, IT-600 mounted correctly
These hooks are used to stabilize the Handheld Terminal when
mounting it on the cradle.
IT600_E_P40_51.p65
07.3.8, 4:10 PM
41