Canon FS10 - Manual (Page 88)

Additional Information
88
CHECK THE CARD
- Cannot access the memory card. Check the memory card and make sure it is inserted correctly ( 29).
- A memory card error occurred. The camcorder cannot record or display the image.
- If after the message disappears,
appears in red, perform the following: Turn off the camcorder and
remove and reinsert the memory card. If turns back to green you can resume recording/playback.
- Initialize the memory card ( 30). (Doing so will erase all the recordings on the memory card.)
CONNECT THE COMPACT POWER ADAPTER
- When the camcorder is in mode and is connected to the computer, this message will appear if the
camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder.
COULD NOT ADD TO PLAYLIST
- The playlist cannot contain more than 100 hours of scenes.
INITIALIZE USING ONLY THE CAMCORDER
- There is a problem that prevents accessing the selected memory. Initialize the built-in memory ( /
only) or memory card with this camcorder ( 30).
MAY NOT BE POSSIBLE TO RECORD MOVIES ON THIS CARD
- You may not be able to record movies on a memory card without a Speed Class rating. Replace the memory
card with one rated Speed Class 2 or higher.
NAMING ERROR
- The folder and file numbers have reached their maximum value. Set [IMG NUMBERS] to [RESET] ( 80) and
erase all the images on the memory card or initialize it.
NEED TO RECOVER FILES FROM THE CARD. CHANGE THE POSITION OF THE CARD'S LOCK SWITCH.
- This message will appear the next time you turn on the camcorder if power supply was accidentally
interrupted while the camcorder was writing to the memory card and later the position of the card's LOCK
switch was changed to prevent erasure. Change the position of the LOCK switch.
NO CARD
- There is no memory card in the camcorder.
NO IMAGES
- There are no still images to play back.
NO SCENES
- There are no scenes recorded in the memory selected.
NOT AVAILABLE IN MODE
- You pressed a button that cannot be used in mode (while the button's blue light is on). Press
the button to set the camcorder to flexible recording mode.
PROCESS CANCELED
- The process was canceled following user intervention.
REACHED THE MAXIMUM NUMBER OF SCENES
- The maximum number of scenes has been reached. Delete some scenes ( 41).
- Scene could not be added to the playlist ( 51). The playlist cannot contain more than 99 scenes. Delete
some scenes ( 41).
/ READING THE BUILT-IN MEMORY
- Reading data from the built-in memory.