Failover configuration, One host with two nbas, and two sas drives), Failover reference configuration 4 – Dell PowerVault TL4000 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Dell PowerVault^*^ TL4000/TL2000 Failover Guide
Failover configuration
(one host with two NBAs, and two SAS drives)
BSa:" —
Main Path
Failover Path
Figure 3: Reference Configuration 3
Failover Reference Configuration 4:
One Host with dual Fibre Channel HBAs, two Fibre Channel switches and a Dell PowerVault^
with two Fibre Channel drives
In this configuration, failover occurs if one or more of the following occurs:
- One of the drives fails (hardware failure or is drive disconnected from the HBA port)
- One of the HBA controllers fails
- One of the switches fails
The physical connection of this configuration is shown in Figure 4.
Important Note: Dell Recommends Fibre Channel drives to be same generation. For Heterogonous
configurations refer to section: Heterogonous Validated Configurations
7 | P a g e
1 2 / 3 1 / 0 9 v e r s i o n 2 . 0