Canon iP5200 User Manual
Page 33
Advanced Printing
29
Connecting to a PictBridge Compliant Device
To connect a PictBridge compliant device to this printer, use the USB cable supplied
with the device.
Do not connect any equipment other than PictBridge compliant devices or
Canon Bubble Jet Direct compatible digital camera to the Direct Print Port
of the printer. If you do so, electric shock, fire, or damage to the device
could result.
z When printing photos with the digital device connected to the printer,
it is advisable to use the AC adapter supplied with the device. If you
use the device battery, be sure to charge it fully.
z The Print Head cannot be aligned using the controls of the digital
device. The print head alignment can be performed simply by pressing
the RESUME/CANCEL button on the printer, or by connecting the
printer to the computer and then executing automatic print head
alignment. Refer to
“Aligning the Print Head”
on page 60.
1
Set up the printer.
2
Turn on the printer.
See
“Turning on the Printer”
on page 2.
3
Load the paper in the printer.
See
“Loading Paper”
on page 4.