Concord Camera Eye-Q 4062AF - Manual (Page 27)

25
En
TAKING VIDEO CLIPS
The camera can capture video clips with sound.
To record a video clip:
1. Slide the Mode Switch to ( ) Video Clip Mode.
2. Position the subject in the LCD.
3. Press the Shutter button half-way to activate the focus until the green AF LED stops blinking and the AF
frame turns green.
4. Press the Shutter button fully to capture a continuous video clip. The time recorded will be shown on the
LCD. The camera can take video clips until the memory is full.
To stop recording:
1. Press the Shutter button again to stop recording.
OR
2. The camera will continue recording until the memory limit has been reached.
Video Clip Information
Resolution: QVGA (320x240) or
QQVGA (160x120) (Best for e-mail)
Frame rate: 30fps
File Format: AVI (Motion Picture)
Note:
• Do not open the battery door or turn the camera off while recording. Otherwise the video clip may not be
stored.
• Higher capacity memory cards can take longer video clips.
• The Flash, Macro, Continuous Shooting, and Zoom in/out are deactivated in video clip mode.
TAKING VIDEO CLIPS
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
⁄ ⁄
X2 X1
28 SEC
1 SEC A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
Press Shutter to Record
28 SEC
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
⁄ ⁄
X2 X1
28 SEC
1 SEC A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
28 SEC
Press Shutter to Stop
DC4062-5062 UG(514173-00)-E 25 5/31/04, 10:05:41 AM