Turning power on and off, Changing channels, Adjusting the volume – Motorola DIGITAL CABLE RECEIVER DCT2500 User Manual
Page 23: Basic operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION
Turning Power On and Off
Press
POWER
on the front panel to turn the DCT2500 on or off. If using the
remote control, be sure it is in cable mode by pressing
CABLE
, and then press
POWER
.
Changing Channels
You can change channels in two ways:
•
Press
CHANNEL
▲ or ▼ on the front panel of the DCT2500, or
press
CHANNEL
+ or - on the remote control to step through the
channel selection.
•
Enter the number of the channel you want to tune using the numeric
keys on the remote control.
Adjusting the Volume
Press
VOLUME
+ or - on the remote control to adjust the volume. When
you adjust the volume, the volume scale is displayed on the screen.
Press
MUTE
on the remote control to turn the sound off and on again.
For best audio quality, use the remote control to set the DCT2500 to
approximately % of the maximum volume level and then adjust the audio
levels on the external devices, such as your TV.
Your VCR’s audio outputs are not affected by adjustments to the volume.
1 7