Cadillac 2006 SRX User Manual

Page 193

To program the vehicle to a different mode, use the
following procedure:

1. Enter the personalization portion of the SETUP

menu following the instructions listed previously.

2. Turn the TUNE/SEL knob until REMOTE EXIT

RECALL is highlighted.

3. Press the TUNE/SEL knob to switch back and forth

between on and off.

When the mode is turned on, a check mark will
appear next to the feature name.

If this feature is selected, Remote Recall Memory
cannot be selected.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Key in Recall Memory

If your vehicle has the optional memory package, you
will have this feature. When this feature is turned on, you
can recall any previously programmed seat and mirror
positions when the key is inserted into the ignition.

Programmable Modes

Mode 1: ON

Mode 2: OFF

Before your vehicle was shipped from the factory,
it was programmed to Mode 2. The mode to which the
vehicle was programmed may have been changed
since it left the factory.