A warning, Warning – Bissell 25A3 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to use this guide
This user’s guide has been designed to heip
you get the maximum satisfaction from your
BiSSELL deep cieaner. You’ii find assembiy
and operating instructions, safety precautions,
as weii as maintenance and troubieshooting
instructions. Piease read this user’s guide
thoroughiy before assembiing your deep
cieaner.
Your deep cieaner comes in four easy to
assembie components:
• Handie assembiy
• Upper hose rack
• Lower body assembiy
• Lower hose rack
Four Phiiiips ® head screws are inciuded, 2 iong
and 2 short. They can be found taped to the
handle assembly.
Assembly
A
WARNING:
Do not plug in your cleaner
until you have completely
assembled it per the
instructions and are familiar
with all instructions and
operating procedures.
Tip:
The only tool you will need to assemble your
cleaner is a Phillips head screwdriver.
1.
Slide handle assembly onto lower body
and secure with two long screws.
2.
Attach upper hose rack to back of handle
assembly by pushing into open slots and
sliding down until it snaps into place.
3.
Attach lower hose rack by sliding in place
on lower body assembly and securing with
2 short screws.
4.
Attach Tough Stain tool to end of hose.
5.
Wrap flex hose around hose rack and secure
it into notched out holder as shown.
6
.
Keep flex hose locked in place with hose
secure latch.
Im ■ p Hose Secure Latch W W W , b i s s e l l . c o m 8 0 0 , 2 3 7 , 7 6 9 1 ug120-4078_25A3_908.indd 6 10/14/08 1:20:59 PM