Bissell 25A3 - Manual (Page 12)

./
Operation
Empty the 2-in-1 water tank/ clean removable nozzle
1. Turn power switch off. Remove the 2-in-1 water
tank from the base using the tank carry handie.
Carry the tank iike a bucket to a utiiity sink or
outside where you wiii dispose of the coiiection
water. Remove the top of the tank by rotating the
handie forward to uniatch iid and iifting iid off tank.
2. Empty coiiection water from bottom of tank.
3. After each use, remove and rinse the iint
screen iocated on the tank iid.
4. if nozzie needs fo be deaned: remove by grasping
handie at the fop and puiiing forward. Ciean
removabie nozzie by rinsing under running water.
5. When finished, repiace nozzie by siightiy
raising front of machine to iine up siots on the
base with the hooks on nozzie. Attach at base
first and then ciick nozzie into piace.
NOTE: If nozzle Is not attached properly loss
of suction will occur.
6 .
To continue carpet cieaning, refer back to
pages 10 through 11, beginning with “Fiii
the 2-in-1 water tank” on page 10.
If cleaning is complete, refer to the “Maintenance
and care” section on page 15.
Ready Tools^'^
Your ProHeat deep cleaner comes equipped with
a hose and at least one attachment for cleaning
stairs, upholstery, and more.
Important! If using the machine to clean
upholstery, check upholstery tags.
1. Check manufacturer’s tag before cleaning. “W”
or “WS” on the tag means you can use your
PROHeat. If the tag is coded with “X” or “S”
(with a diagonal strike through), or says “Dry
Clean Only,” do not proceed. Do not use on vel­
vet or silk. If manufacturer’s tag is missing or not
coded, check with your furniture dealer.
2. Check for colorfastness in an inconspicuous place.
3. If possible, check upholstery stuffing. Colored
stuffing may bleed through fabric when wet.
4. Plan activities to give upholstery time to dry.
/
V
,7
12
W W W , b i s s e M , c 0 m 8 0 0 , 2 3 7 , 7 6 9 1
ug120-4078_25A3_908.indd 12 10/14/08 1:21:06 PM