Getting started, Step 1. connect the base – Motorola L303 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting started
step 1. Connect the base
*
Plug the power adapter with smaller pin plug & telephone line cord
into the base. Power adapter with bigger pin plug is for charger (for
multi-pack only).
* Plug the other end of the power adapter & telephone line cord into
the wall jack.
TIPS
Do not place your phone in the bathroom or other humid areas. Please
refer to the user’s guide for more cautions when you choose the location
of your phone.
IMPORTANT
Only use the power adapter and telephone line cord supplied with the
product.
step 2. Install and charge the handset
battery pack
* Slide out the battery compartment cover. Place the supplied
rechargeable battery pack in the battery compartment, with the
battery connector plugged in, as shown.
* Slide the battery compartment cover back.
* Put the handset on the base to charge for at least 24 hours. When
the handset is fully charged the will indicate that it is fully charged.
IMPORTANT
Use only the rechargeable battery pack provided.