Xpres Subli-Print Epson R1800: Bulk Feed (series 4) installation Instructions XP5043 - Manual (Page 4)

Fit cartridges into their respective slots
and firmly press them down into place.
Move the printhead back to it’s cartridge
removal position.
The tube support (2a) fits on the printer
housing 70mm (2¾”) from the edge of the
bridge as shown.
Remove the backing tape and firmly press
the tube support into position.
With the printhead pushed to its furthest
position on the right, take up any slack in
the tubing by pulling it through the tube
clamp.
Page 4