Xpres Subli-Print Epson 1400: Bulk Feed Instructions OLD STYLE (pre June 2010) - Manual (Page 5)

Page | 5
Do not worry if you see a small
amount of air in the tubes when you
first install the system. This will
quickly find it’s way to the top of
the cartridges during the initial head
charge.
This tiny amount of air in no way
impedes the full working order of
the system.
Plug the mains cable back in and turn on the printer. It will now go through the
initial head charge. Your system is ready for use.
Print a nozzle check to ensure all heads are printing ok. Read following section if
you do not have a perfect nozzle check.