Xpres SubliJet R Ricoh SG7100DN (Windows Power Driver Setup): Power Driver User Manual for Windows 8 - Manual (Page 4)

SubliJet-R: Ricoh SG 7100DN
PowerDriver-R User’s Manual - Windows 8
PAGE 3 of 9 >>
SECTION 1
Copies Sets the number of prints needed per image. Use this feature when multiple prints of
the same image are needed.
Paper Size Sets the desired output paper size used in the printer. Adjust this to match the size of
the transfer paper in the paper tray.
Substrate Sets the desired substrate being used. Match this to the type of material on to which
you will be transferring your printed image. Because PowerDriver’s color manage-
ment is optimized for each substrate listed, it is important to choose the substrate that
most closely matches the substrate being used.
Paper Type Sets the desired paper type being used. Match this to the type of transfer paper you
will be printing on. Because PowerDriver’s color management is optimized for each
paper type listed, it is important to choose the paper type that most closely matches
the transfer paper being used.
SECTION 2
OEM Sets the OEM printer intended for use with PowerDriver-R. This feature is particularly
useful when printing to multiple printers of the same ink set or multiple printers that
require multiple drivers. For instance, if you have two SG7100DN’s and one is for
printing ChromaBlast-R while the other is for printing SubliJet-R, you are able to set
the printer loaded with SubliJet-R as the default printer in the PowerDriver-R or vice
versa. On the other hand, if you have two SG7100DN’s and both are for printing with
SubliJet-R, you can choose between each printer per print job.