Xpres Subli Print Ricoh GXe7700N - Manual (Page 12)

To setup Corel Draw 10 - X4 follow the steps below.
1. Before opening Corel Draw you need to install the Xpres Sublimation Colour Profile, this can be downloaded
from
or can be found on the Subli Print CD supplied.
Save the Colour Profile on to your Desktop (drag and drop if taking from the supplied CD). Now Right Click the
Colour Profile (Subli_Print_GXe7700N_V1.1) and select ‘Install Profile’ - There will be no confirmation that the file has been
Note: If this ‘install’ option does not appear change the
file extension from ‘.ICM’ to ‘.ICC’ and repeat the
above.
2. Now open Corel Draw and open a new page. Click on Window > Colour Palettes. Click on ‘Default RGB Palette’.
Repeat the above and click ‘Default CMYK Palette’ to deselect this option. The Colour Palette menu should
appear as shown below.
www.xprestechnical.co.uk
CorelDRAW 10 - X4 Setup
10
installed.