Xpres SubliJet E Epson Stylus Pro 9890 (Windows ICC Profile Setup): Print & Setup Guide CorelDRAW 10 - 12 - Manual (Page 2)

Epson Stylus Pro 7890 / 9890
Setup and Print Guide - CorelDRAW 10, 11, 12
PAGE 2 of 4 >>
Composite Printer settings: Select the appropriate ICC profile for your printer
Note: If you can’t choose the ICC profile from the drop down menu this could mean the ICC profile is
not yet installed on your PC or you have not restarted CorelDRAW since the ICC profile was
installed.
Close and re-launch Corel.
Internal RGB Space: Select Internal RGB – Fraser (1998) from the drop down menu.
Monitor: This can be set to Generic Profile or if you have an ICC profile from your monitor’s
manufacturer
this can be selected.
Scanner: This can be set to Generic Profile or if you have a specific ICC profile from your scanner’s
manufacturer
this can be selected.
Separations Printer: Not used or set to your current device if you print separations.
To save your settings: Click the + button to open the Save Color Management Style window
(Figure 3). Name your setting accordingly and Click
OK.
3. Configure the settings in the Color Management window.
The green arrows and numbers correspond to each phase of the setup process.
To configure Import-Export Settings - Click on the paper icon to open the Advanced
Import/Export Settings window (see FIGURE 2). Advanced import/export
settings control how Corel controls files.
FIGURE 2
FIGURE 3
1
2
3
4
5
6
7