Setup and print guide - photoshop cs6 – Xpres SubliJet IQ Epson Stylus Pro 9890 - IQ Pro Photo (Windows ICC Profile Setup): Print & Setup Guide Photoshop CS6 User Manual

Page 6

PAGE 6

of 6 >>

SubliJet-IQ Pro Photo: Epson Stylus Pro 7890 / 9890 - WinProfile

Setup and Print Guide - Photoshop CS6

D. Printer Profile:

select the appropriate ICC profile for your printer

F. Rendering Intent:

Perceptual

G. Check

Black Point Compensation

H. Click

Print Settings (see FIGURE 7). This will open the Properties window (see FIGURE 8).

a. Select your previously saved setting

NOTE: If your previously saved setting is not visible in the drop-down menu, refer to

the Configuration Guide.

b. Click

OK to continue

I. Click

Print when you are ready to print your image (see FIGURE 7)

Congratulations! Photoshop setup is now complete. Remember to select the Epson Stylus Pro 7890 / 9890
each time you are ready to print.

NOTE: If the profile is not visible in the drop-down menu, try restarting Photoshop. If the

profile is still missing after restarting Photoshop, refer to the Installation Guide.

E. Select:

Normal Printing

FIGURE 8

This manual is related to the following products:

See also other documents in the category Xpres Equipment: