Xpres SubliJet E Epson Stylus Pro 7900 (Mac ICC Profile Setup): Print & Setup Guide Photoshop CS - CS4 - Manual (Page 7)

PAGE 7 of 8 >>
Epson Stylus Pro 7700 / 9700 - Mac OS X
Setup and Print Guide - Photoshop CS, CS2, CS3, CS4
A
B
C
D
E
A. Click the drop-down arrow and select Media Type: Photo Quality Ink Jet Paper
B. Click the drop-down arrow and select Print Quality: SuperFine - 1440dpi
C. Check Super MicroWeave
D. Check High Speed
E. Check Flip Horizontal
F
F. Check Finest Detail
G
G. Click Print and Photoshop will print your image using the high quality driver settings combined
with the sublimation ICC profile.
FIGURE 9
5.) There are two different driver settings, one for high speed and one for high quality. The high speed
driver settings should be used when the highest quality is not a priority, this is ideal for fabric based
substrates. The high quality driver settings should be used when speed is not an issue, this is ideal
for hard substrates.
Printing with High Quality Settings
Match your settings to those shown below: (see FIGURE 9)