Xpres Canvas - Manual (Page 2)

STEP BY STEP
Step 8
Push the excess material over the back of the frame and using a staple gun,
staple around all 4 sides. Once the above is complete trim any excess material off
using the inner edge of the frame as a guide with a knife, making sure the blade
does not come in to contact with the print face.
Step 9
Finally cover the edge of the print and staples with the frame tape to leave a neat
and professional finish, and then screw on hanger.
Phone:
Web:
E-mail:
Support: 01332 855 085
www.xpres.co.uk
[email protected]
www.xprestechnical.co.uk
Oakridge Park, Trent Lane
Castle Donington, Derby
DE74 2PY
PLEASE NOTE: The sellers and manufacturers maximum obligation shall be to replace any product
that has been proven to be defective. Neither the seller nor the manufacturer of the items required
when following these instructions shall be liable for any injury direct or consequential, arising out of the
use of, or inability to use this range.
®
Canvas Assembly Instructions
ITEMS REQUIRED: XP3201 - Corner Kit
XP3203 - Framing Tape
Please Note: When using a frame size of 20"+ XP3202 - Centre braces are recommended
MD-AC370 - Canvas
XP3205 - Brass Plated Screws
XP3200 - x2 Frames
XP3204 - Sawtooth Hangers