Ab a, Ab a b or, Ab a b – Workrite Verano User Manual
Page 2: Verano installation instructions, Child daisy chain units
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Installation Instructions for Verano™
#1500149 - Rev E
B
Jumper Cable
Qty: 1
Verano Installation Instructions —
child daisy chain units
(see reverse for single or parent unit installation)
Determine if light will be affixed to a metal or wood cabinet and follow the appropriate step below.
Be sure to position daisy-chained unit so that it can be connected to the previous unit with its supplied jumper cable.
1
Connect daisy-chained Verano unit to previous unit
with the supplied Jumper Cable (B), or use Power
Connector (H) to join two fixtures together. Plug
power cord into Verano unit end.
3
a
b
a
On/Off
Plug in
Plug in
On/Off
a
b
Replacement parts
Daisy Chain Jumper Cords, 24” ................................................................................................ VER-DC24
Daisy Chain Jumper Cords, 48” ................................................................................................ VER-DC48
Max 4.0A (48 watt) transformer ............................................................................................... VER-T45
Verano hardware pack (contains qty 3 each of parts C, E and F, 4 of D, and qty 9 of G) ................... VER-HDWR
A
Light Fixture
Qty: 1
C
Rotating Magnetic Mounts
Qty: 3
E
Rotating Wood Mounts
Qty: 3
D
Fixed Magnetic Mounts
Qty: 4
F
Fixed Wood Mounts
Qty: 3
G
M4
Wood Screws
Qty: 9
H
Power Connector
Qty: 1
Note: All mount options allow fixture to slide from side to side - mounts can be positioned up to 6” from edge of fixture.
!
I
Cable Clips
Qty: 2
.75
c
Maximum Daisy-chained units: Number of fixtures within same chain with 4.0A
12V transformer
VER-24
1
1
2
1
1
2
2
3
4
VER-36
1
1
2
1
2
1
3
VER-48
1
1
2
1
1
Total/Chain
2
2
2
2
2
2
3
3
3
3
3
3
4
CAUTION – To reduce the
risk of fire, electric shock
or injury to persons refer
to the chart at right for
maximum daisy-chained
units:
!
H
B
I
Press power button on Verano to turn on/off.
b
Use Cable Clips (I) as needed to secure cord.
c
Snap Magnetic Mounts (C or D) onto back
rail. For Rotating Mounts, orient flat sides
of Magnetic Mounts with the length of the
Verano.
Metal cabinet mounting:
2
Attach Wood Mounts (E or F) to underside
of cabinet with Wood Screws. (G). If using
3 mounts, be sure they are positioned in a
straight line.
Wood cabinet mounting:
Note: You will need a Phillips-head screwdriver to complete this step.
a
b
a
b
OR
Under-Cabinet
Under-Cabinet
“SNAP”
“SNAP”
Under-Cabinet
Align at side
with back rail
Press down to
snap into rail
“SNAP”
Place lamp on
under-cabinet
“SNAP”
1" - 6"
var.
1" - 6"
var.
a
b
a
b
Align mounts parallel
to edges of cabinet
E
A
C
A
G
Attach Light Fixture (A) to metal under-
cabinet. Magnets will hold Verano in place.
D
Snap Light Fixture (A) onto mounts to hold
in place.
OR
F
OR