Workrite Sierra HX Crank Assembly Instructions for 3-Leg Front-Crank models - Manual (Page 6)

6 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Sierra HX™ 3-Leg Crank Workcenters - Assembly Instructions
d
Left Leg
Right Leg
Use one Deep Hex Shaft (L) to connect Crank Tube to gear mechanism in other side of Center Leg
(O). See diagram for correct placement and orientation.
c
Base-Only models, please skip to Step 7.
Attach top plate of Center Leg to desk using 4 Pan Head Screws (M) provided. Use the locating
holes. If you use an electric screwdriver, be sure it is on the lowest torque setting to avoid stripping
the threads.
d
Use one Shallow Hex Shaft (K) to connect Crank Tube (D) to gear mechanism in side of Center
Leg (O) pointing to Right Leg. The shorter end of the hex shaft should be inserted into the
Center Leg.
b
M
6
continued...
b
d
Left Leg
Right Leg
c L
D
K
D
O