Canon FB630U/FB636U User Manual
Page 55
55
A P P E N D I C E S
Scan button cannot be selected
➤
Solution 1: A scan cannot be performed if the scan area is set too small (less
than 64 x 64 pixels). Increase the size of the scan area
➤
Solution 2: A scan cannot be performed unless a scan area is specified. Specify a
scan area
➤
Solution 3: A scan cannot be performed if the required memory is larger than
the free memory. Change the resolution
until the required memory is lower
Problem:
The “Insufficient Memory” error message appears when
scanning
➤
Solution 1: Select the smallest possible area and rescan
➤
Solution 2: Lower the resolution and magnification settings for the output
device to the lowest possible values
➤
Solution 3: Close all other software applications other than Canon Photo, then
try scanning again
➤
Solution 4: Close all software applications including Canon Photo, then restart
Canon Photo and scanning again
➤
Solution 5: Shut down Canon Photo and all other applications and increase the
amount of free memory, then start Canon Photo again.
➤
Solution 6: Increase the amount of RAM as required
*Plug-inModuleCS-U3.3/1-70
12/1/99, 4:06 PM
55