Canon FB630U/FB636U - Manual (Page 31)

31
S T E P 2
Once you have set the magnification and scan mode, you may proceed with the scan.
Once the scan is complete, Plug-in Module CS-U automatically closes and returns to the
application software, such as Canon Photo. The following provides an example of
scanning from within Canon Photo.
To Initiate the Scan
Specify the Scan Area.
See Operating Procedures (p. 28) .
Click the [Scan] button.
• The image will begin to be scanned.
• When complete, the Plug-in Module CS-U control panel will close and the Save file
dialog box will display. To save an image file, see Saving Scanned Images (p. 32) .
Scanning
Hint
• The scan button [ ] cannot be clicked if the scan area is set too small (less
than 64 x 64 pixels) or not specified.
• The scan cannot be performed if the required memory is larger than the free
memory.
➟
*Plug-inModuleCS-U3.3/1-70 8/10/99, 6:31 AM 31