VintageView IDR4EC - 4 IDR Endcap - Manual (Page 3)

6.1. Move the IDR into place and adjust the footer pads to level
the rack by turning the shaft either clockwise or counter-
clockwise.
6.2. Lock the footer pads in place by tightening the nut up
against the base upright.
6.3. Insert square plastic caps into top of uprights for a finished
look.
6.4. Place all round plastic caps in mounting holes on racks.
6.5. Load the rack and enjoy the VintageView ® !!!!
6. Make Final Adjustments
5.6. Repeat steps 6.1 through 6.5 alternating between neck and
base strips
IDR Assembly Instructions (cont.)
Assembled IDR:
Assembled IDR loaded with bottles:
CR3
WS Rack
CR3
WS Rack