VintageView IDR4EC - 4 IDR Endcap - Manual

Wine storage system
Each IDR3 or IDR4 kit contains:
1. 2.
3 .
4.
5 .
6 .
7.
8.
9.
10.
11.
1 . 6 WS33 or WS43 VintageView ® racks (bottles not included)
2. 2 IDR3 or IDR4 Base Uprights,
IDR-BX only contains 1 Upright
3. 4 Leveling Footer pads with 1 nut and 1 washer each,
IDR-BX only contains 2 Footer Pads
4. 6 PCS 1-1/2”X1-1/2” Plastic Endcaps,
IDR-BX contains 3 Endcaps
5. 12 Self-tapping screws
6. 4 ea. 5/16”X 3/4” Nuts, Bolts and Washers
IDR-BX only contains 2 sets
7. 3 Cross Rails (IDR-CR3)
8. 18 PCS #10X1” Bolts with Nuts
9. 2 Sides for IDR-PR (Presentation Rack)
10 . 3 #10X1/2’ Bolts with Nuts
11. 42 Plastic Mounting Hole Covers
1. 2 x 12mm Open End Wrench
2.
14mm Open End Wrench
3. #2 Phillips Head Screwdriver
(Drill with adjustable torque clutch recommended)
4. 8mm nut driver (supplied in IDR-AK)
5. Rack Alignment tool (supplied in IDR-AK)
Required Tools
Island Display Rack (IDR)
Assembly Instructions
1. 2.
3 .
4.
Each IDR-EC kit contains:
1 . 2 WS31 or WS41 VintageView ® racks (bottles not
included)
2.
3 End Cap Rails
3 . 6 Self-Drilling Screws with Washers
4.
12 Self-Drilling Screws
Wine Master Cellars • 2000 S. Dahlia Street, Unit 300, Denver, CO 80222 • phone: 866.650.1500 • fax: 866.650.1501
Please feel free to contact us regarding the assembly of this product.
1. 2. 3. 4. 5.