Planning the installation – Vintage Cellars Through-the-Wall Wine Cellar Cooling System Manual User Manual
Page 21

21
WARNING
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
Modification to the equipment may cause injury or damage
to the equipment
.
DANGER
This equipment is heavy. Place the unit on the floor or on a level and stable
surface that can support the full weight of the unit.
Do not modify the equipment, it may cause damage to the equipment and
voids the warranty.
Never place anything on top of the unit.
Never block or cover any of the openings or outlets to the unit.
Never allow anything to rest on or roll over the power cord.
Never place the unit where the power cord is subject to wear or abuse.
Do not use extension cords.
Never overload wall outlets.
Do not remove or open any cover unless the unit is turned off and the power
cord is plugged in.
Use only dedicated power outlet boxes of the correct capacity and
configuration for the unit model.
CAUTION
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
Improper installation may result in the equipment malfunctioning and a safety hazard. Read
all of the installation instructions before installing the Wine Guardian unit
Planning the Installation
Tools required
Drill/Phillips head Level Stud finder Tape measure Square Drywall screws
Urethane caulk Hand saw Drywall saw Heavy duty
s
nap knife